What Are The Advantages Of a Tipper Truck U Shape Bucket ?

Tipper truck is widely used, the main advantage is to be able to easily and quickly transfer all kinds of large quantities of goods, improve transport efficiency, reduce labour costs, for all walks of life to provide a more convenient means of transport. Different types of tipper truck bucket have different characteristics and applicable scenarios, usually there are two types of bucket, rectangular bucket and U shape bucket. This article will focus on the advantages of U shape bucket, as follows:

 

 

1. Cleaner Unloading

 

A lot of soil and granular materials with high water content can not be dumped cleanly at one time, and the stuck materials not only make the tipper truck very dangerous when lifting, but also make it a trouble to clean up the bucket. The corners of U shape bucket do not have dead corners, so it is not easy to stick to the bucket when unloading, and the unloading is cleaner.

 

 

2. Light Weight

 

Rectangular bucket tipper bucket are through the thickening of steel to improve the strength, U shape bucket through the structure optimisation, reduce the deadweight. Now the most common U shape bucket tipper truck is using high strength plate, under the premise of ensuring the strength of the compartment, the thickness of the plate is reduced by about 20%, and the deadweight of the compartment is reduced by about 1 tonne, which effectively improves the utilisation coefficient of the loaded mass.

 

 

3. Low Centre Of Gravity

 

Most of the tipper trucks have high sub-frames, and their center of gravity is higher than that of ordinary trucks when loaded with goods. It is easy to roll over in muddy potholes, but the bottom of U shape bucket is curved, which can make full use of the space in the middle of the sub-frame, and some U-boxes can even lower the center of gravity of the whole vehicle by about 100mm. This makes driving smoother, especially when cornering, and avoids cargo spillage.

 

 

4. High Load-Bearing Capacity

 

U shape bucket is made of high strength steel plate with high yield strength, better impact resistance and fatigue resistance. For users of ore transport, it can reduce the damage of ore head on the bucket.